| 1. | Horology . pallet escapements . relative height of components
钟表业.表盘棘轮装置.机件的相对高度 |
| 2. | Feature used in this method include relative height of the peak , width of the peak and notable degree of the peak
本方法依据的特征有峰的相对高度、峰的宽度、峰的显著度等。 |
| 3. | The following conclusions are reached . ( 1 ) the relative height compressive zone of section or the axial force is bigger , the rotational capacity of the section is weaker
得出了以下主要结论： ( 1 )截面相对受压区高度、截面所受轴力显著地影响预应力框架梁截面的延性。 |
| 4. | The opposite route is also possible , i . e . form a terrain , and its height map , it is possible to create a greyscale image , where each pixel ' s intensity corresponds to a relative height
相反的路线一样是可行，例如，从一个地形，它的高度图，我们可以创建一个灰度图，让其每个象素的强度代表相应的高度值。 |
| 5. | ( 3 ) the relative height compressive zone of section greatly influences the redistribution of internal force of the prestressed frames . the total modulation of moment decreases according as the increase of relative height compressive zone of section
随着中支座截面相对受压区高度的增大，次弯矩增大，次弯矩调幅增大，但荷载弯矩调幅以更大的幅度下降，导致总的弯矩调幅下降。 |
| 6. | Based on the singularity value of each pixel and its relative height , that is given by computing spectra associated with different kinds of capacities denned from gray levels , edge information of image is gotten according to the modified multifractal spectrum
将混沌理论引入数字水印初始序列的创建中，实现了混沌序列水印在原始图像小波域中的自适应嵌入，从而兼顾了数字水印的不可见性和鲁棒性。 |
| 7. | If the reportviewer control uses relative height for example , if the height is specified as a percentage of available space , the control collapses to a height of 0 pixels as a result of how frames and div tags render in containing tables in xhtml
如果reportviewer控件使用相对高度（例如，将高度指定为可用空间的百分比） ，则由于框架和div标记在xhtml格式的包含表中的呈现方式，该控件将折叠为0像素的高度。 |
| 8. | At first , this thesis analyzes the main causes in theory , which have effects on the redistribution of internal force and modulation of moment for the bonded post - tensioned partially prestressed concrete frame ( for short prestressed frame ) , including the relative height of compressive zone of section ( ) , secondary moment and types of load applying . then , this thesis analyzes the test of prestressed frame . then , a method , called curvature - force method , for nonlinear analysis of prestressed frame is put forward
本文首先从理论上分析了影响后张有粘结部分预应力混凝土框架（简称为预应力框架）内力重分布和弯矩调幅的主要因素，即相对受压区高度、次弯矩和加载方式等，并初步分析了两榀只加竖向荷载和两榀既加竖向荷载又加水平荷载的单层单跨预应力框架静力加载的试验。 |
| 9. | The main causes , which have effects on redistribution of internal force in the prestressed frame , including the relative height compressive zone of section , secondary moment and types of load applying are taken into account . the horizontal braces force which results from the tension of the prestressing steel , reduces the pre - compress stress is analyzed
并且探讨了各影响因素对框架梁截面延性的影响和由于柱的抗侧刚度在预应力钢筋张拉时约束梁的轴向变形，从而影响预应力在梁中的建立所造成的梁中轴向预压力的损失。 |
